KALEA-INFORMATIQUE PCI Express 1x Replicator Riser to 4 PCIe Ports 1x CHIPSET ASM1184e MOLEX P6 SATA Recovery - Pcie Expansion kit

Description: 1.2 layer PCB bard designing. 2. Compliant with PCI express 2.0, 1.1 Specification 3. 1-slot PCI-E 1X to 4 slot 1X riser card with high speed USB 3.0 cable. 4. High speed USB 3.0 shield cable is flexible for 1U, 2U, 3U chassis. 5. Support 4 port high speed PCIe 1X card.6. Solid capacitor provides extra stable power supply for PCI-e card. Instructions: If you need more than one PCI-E x1 slot on the motherboard was not any so much, it keys you can think about it. It consists of two parts, one main card, interface, installed via PCI-E X1 on the motherboard, two equipment cards, both of which are connected together via USB 3.0 cable. The device card also uses the USM1184e bridge chip, for switching PCI-E, PCI-E between. But even USB 3.0, but also the theoretical bandwidth 5Gbps (625MB/s), one Into four Then remove the loss would only 150MB/s, and even PCI-E 1.x single-channel bandwidth also has 250MB/s, so this stuff more than enough to give you the best slots, there will not be enough bandwidth, not only for the performance requirements of the place. Therefore, the transferred PCI-E slot is the best version above 2.0, the 3.0 version is better. Several Divided PCI-E 1X slot all is gen2 mode, even if gen1 previously ,it can be ok. Package includes: 1 x 1 to 4 mining board adapter. 1 x PCI-E 1 x riser card. 1 x USB 3.0 cable.

• This adapter works as a multiple socket that allows from a PCIe 1x port to get 4.
• The base will be inserted into a PCI Express 1x to 16x port of server or desktop PC. It is supplied with a high profile openwork bracket allowing the connection cord to pass to the outside of the PC case.
• The daughter plate, connected to the base by a supplied 60cm cord, has 4 PCIe 1x ports that you can operate independently. You can replace this cord with a longer or shorter cord since it is a simple USB3 cable type A male/A male (pay attention however to its quality if you want to replace our supplied cord! ).
• CHIPSET ASM1184e Extension plate with adhesive insulation on the bottom. 3 possible power returns via SATA, Molex or P6 plug.
• Set consisting of: 1x motherboard, 4-port 1x daughter plate, SATA/Molex power adapter, USB3 cable for connecting the two plates (60 cm).